WF 1600 Wood Filler
Category
Wood Filler
Description
WF 1600 is a one pack wood filler. WF 1600 wood filler give good filling properties for solid timber and veneer. WF 1600 wood filler is available in all range of colours. WF 1600 wood filler is use when full close pore or semi open grain finishes is required. WF 1600 wood filler is easy to apply and give good adhesion property with NC, AC and PU.
Properties
| Colour | Natural, White and Black (Other colours are available upon request) |
| Recoating | Can be coated with NC, AC and PU. |
| Hardness | Good |
| Sinkback | Minimum sinkback after 24 hours |
| Sandability | Easy |
Typical Application
| Solid wood |
| Veneer |
Technical Specification
| Thinning | Reducer – TH 1002 |
| % Thinning | Dependent on application |
| Application | Stir well before use. Apply using a circular motion over area to fill all voids in the timber grain. Use a fresh rag to wipe off excess material across the grain to remove any surface residue. |
| Drying time | Minimum 4 hours |
| Hard dry | 24 hours |
| Coverage | 13 to 15 m2/lt (Dependent on application) |
| Shelf life | 6 months stored in sealed container below 35°C |
| Packaging | 5lt |
Health and Safety
Refer to chemical safety data sheet
Other Information
Unikote only warrants the quality of the product in the can. It is your responsibility as user, before application, to ensure the coating system meets your requirement and is fit for purpose.